Coatings For Industry, Inc. Products

Coatings For Industry, Inc.

Jump to:

ALSEAL Aerospace Coatings

Inorganic ceramic binders allow the ALSEAL line of coatings to endure the extreme temperatures and environments that exist in stationary and aviation gas turbines. The incredible protection and durability of ALSEAL coatings has led to most of the major turbine manufacturers specifying its use.

List of OEM Specifications for ALSEAL Coatings

Guidelines for Applying ALSEAL Coatings

ALSEAL 360	High temperature coating composition containing a graphite blend in an inorganic binder. This coating will air dry and is used to protect mating parts from seizing and galling at temperatures up to 1200F.
ALSEAL 370	High temperature coating composition containing a graphite / molybdenum disulfide blend in an inorganic binder. This coating will air dry and is used to protect mating parts from seizing and galling at temperatures up to 800F.
ALSEAL 500	High temperature coating composition containing aluminum powder in an inorganic binder. Provides sacrificial corrosion protection to temperatures up to 1100F and heat oxidation protection to temperatures as high as 2200F. Can be cured as low as 350F, but can not be used on mild steel substrates.
ALSEAL 505	Air-dry inorganic touch-up coating for use over ALSEAL 500, 518, and 519.
ALSEAL 518	High temperature coating composition containing aluminum powder in an inorganic binder. Provides sacrificial corrosion protection to temperatures up to 1100F and heat oxidation protection to temperatures as high as 2200F. Must be cured at 400F min., but can be used on all steel substrates.
ALSEAL 519	Formulated to provide smoother surface finishes and higher erosion resistance than ALSEAL 518 while still providing all the corrosion and high-temperature properties.
ALSEAL 590	Two component high temperature coating composition containing PTFE. The purpose of this coating is to reduce friction and function as an anti-stick / anti-fouling sealer over ALSEAL 500, 518, and 519.
ALSEAL 598	ALSEAL 598 sealcoat is a high temperature resistant inorganic composition for use over ALSEAL 500, 518, and 519. The purpose of this sealer is to enhance the smoothness of the Alseal basecoats and to extend the long term corrosion protection by retarding the sacrificial consumption of these coatings. Available in multiple colors.
ALSEAL 610	Air-dry inorganic touch-up coating for use over ALSEAL 598 sealcoat.
ALSEAL 625 Diffusion Coating	High temperature coating composition containing aluminum powder in an inorganic binder. ALSEAL 625 applied with standard paint spray equipment and then diffused at high temperature into the substrate to provide oxidation and erosion resistance up to extremely high temperatures. The coating can be used on all nickel based alloys.
ALSEAL HX	High temperature coating composition containing aluminum powder in an inorganic binder formulated specifically for use on automotive headers and components.

Home • Products • MSDS • Contact